Street lighting

A street lighting installation must create an environment that ensures clear visibility and a precise perception of people and objects within the lit areas. This ensures that night-time vehicular and/or pedestrian accidents are reduced to a minimum.

In addition to promoting safety within a lit area, a well designed street lighting installation supports its commercial, leisure and industrial use at night-time.

Our street lighting luminaries

Cut-Off

OB 15-M

OB 15-T

Super-15

Urbalite

Celebrating 55 years of technical excellence

Cut-Off ®

Designed for urban areas which require efficient luminaries and quality lighting.

Main features:

Light flux efficiency of 81%, obtained through Bekolite's innovative optical system, hydroformed out of a single sheet of high specular aluminum.

The Cut-Off has the most efficient reflector in the market, up to 20% more efficient than other systems available.

Vandal resistant as a result of the high mechanical resistance of its hydroformed body. It has no joints or assemblies which might its structure.

Its safety-hinged stainless steel clasps allows the 4.5 mm tempered glass to be sealed and locked with one hand.

The mounting system is on a rotating base, which can be adjusted in increments of 15 degrees to suit the road width.

Integrated ballast with a prorated warranty of five years and a probable life of more than 10 years.

NEMA receptacle for a magnetic photo-control optional.

Recommended lamps up to: 400 W mercury, sodium or metal halide.

Recommended mounting heights: 6 to 12 meters, depending on the road width and inter-postal separation.

ies file

Cut-Off

Its cut-off design controls brightness, minimizes glare, and achieves an extraordinarily high degree of efficiency.

Catalog Code: BCF

Our newest product

OB 15-M ®

Efficient (73% CU and 56% of the lamp's light fall upon the roadway), small in size, lightweight and economical.
Suitable for main and secondary roads.

Main features:

High light efficiency obtained through Bekolite's innovative optical system.

High mechanical resistance as a result of its integral body and reflector, hydroformed in one piece out of a single high specular aluminum sheet.

Supplied with an efficient acrylic refractor.

Integrated ballast with a prorated warranty of five years and a probable life of more than 10 years.

NEMA receptacle for a photo-control optional.

Recommended lamps: 70 through 150 W high pressure sodium.

Recommended maximum mounting height 5 to 8 meters, depending on inter-postal separation.

Recommended maximum road width: 8 meters, depending on lamp used and mounting height.

Maximum inter-postal separation: 3.5 times the mounting height.

OB-15M ies file

Microlite with acrylic refractor

OB 15-M with acrylic refractor

Catalog Code: OB 15-M

OB 15-T ®

Designed for urban areas.

Main features:

Light flux efficiency to floor 78.3% , obtained through Bekolite's unique optical design.

Integrated ballast with a prorated warranty of five years and a probable life of more than 10 years.

Can be supplied with a NEMA receptacle for a magnetic photo-control.

Recommended mounting heights: 5 to 10 meters, depending on inter-postal separation and lamp capacity.

OB-15
Recommended maximum road width: 5 meters

Recommended lamps up to: 100 or 250 W high pressure sodium, 175 W metal halide.
For 250 W lamps a borosilicate glass prismatic refractor is recommended, a very efficient acrylic prismatic refractor can be fitted for lower wattage lamps.

ies file

Stainless steel safety latch resistant to vibration.

Body is built out of pressed aluminum allowing a resistant and light construction.

Catalog Code: OB-15T

Super-15 ®

The first luminaries hydroformed in one piece with an integral reflector and body. The optical system is a geometrical array which uses 100% of the reflecting surface.

Designed for main and secondary roads, parking areas and other urban areas.

Main features:

Light flux efficiency to floor 65% , obtained through Bekolite's innovative optical system hydroformed in one piece.

Vandal-resistant as a result of its
  • 4 mm clear thermal-tempered glass
  • high mechanical resistance obtained by its body; hydroformed out of a single piece of anodized aluminum. It has no joints or assemblies which might weaken its structure.
  • safety clasps

Integrated ballast with a prorated warranty of five years and a probable life of more than 10 years.

NEMA receptacle for a magnetic photo-control as optional.

Super-15
Recommended lamps up to: 250 W mercury, high pressure sodium

Recommended mounting heights: 5 to 10 meters depending on inter-postal separation.

Recommended maximum road width: 10 meters

ies file

The reflector and external body are hydroformed in one piece out of a single piece of high specular anodized aluminum.

Catalog Code: SU 15

Urbalite ®

Designed for urban areas.

Main features

Light flux efficiency to floor 64% achieved by Bekolite's innovative cut-off reflector hydroformed in one piece.

Vandal resistance is achieved by means of
  • the 4 mm clear thermal-tempered glass
  • high mechanical resistance obtained by its body; hydroformed out of a single piece of anodized aluminum.
  • safety clasps
Urbalite
Integrated ballast with a prorated warranty of five years and a probable life of more than 10 years.

NEMA receptacle for a photo-control as optional.

Recommended lamps: 250 W mercury, sodium and metal halide.
Recommended mounting heights: 5 to 9 meters.

ies fileies fileies file

Catalog Code: URB

For further information about our products or the nearest agent to your area, send us a note.

This site was constructed with an Apple.

Apple Computers